GE Oven Repair in Toronto
From classic GE ranges to the Profile series — precise diagnostics and lasting fixes.
- Free Service Call With Repair
- $25 Off When You Book Online
- Same-Day Service
- Warranty on Parts & Labor
Book Your Repair
Leave your details — we’ll call you back to confirm a time.
Common GE Oven Issues
Tap a symptom to see what usually causes it on a GE oven.
Bake Not Working, Broil Works
When broil heats but bake doesn't, the bake element or its relay has failed.
- Bake element
- Bake relay on control
- Burnt terminal
F2 or F3 Error Code
F2 means overheating, F3 a sensor problem — both need the sensor and control checked.
- Oven temperature sensor
- Stuck relay
- Control board
GE Oven Won't Turn On
A dead GE oven usually has a tripped thermal fuse or a failed control board.
- Thermal fuse
- Control board
- Power terminal block
F9 or Door Lock Fault
A lock that won't release after self-clean shows as F9 — the lock motor or switch is to blame.
- Door lock motor
- Lock switch
- Wiring harness
Keypad Not Responding (F7)
F7 means a stuck or shorted key on the touchpad.
- Touchpad membrane
- Ribbon connector
- Control board
Temperature Runs Hot or Cold
Profile and classic GE models can drift — we test the sensor and recalibrate.
- Sensor resistance
- Calibration offset
- Control relay
GE Oven Error Codes
What the code on your display means.
| Error Code | Error Type | Description | Recommended Action |
|---|---|---|---|
| F0 / F1 | Control Fault | Control board or electronic system issue | Diagnose and replace control board |
| F2 | Oven Overheating | Internal temperature too high | Check temperature sensor, stuck relay, or control board |
| F3 | Oven Underheating | Internal temperature too low | Inspect sensor, relay, or control board |
| F4 | Temperature Sensor Fault | Faulty oven sensor | Recalibrate or replace sensor |
| F5 | Door Lock Error | Issue with self-cleaning door lock | Inspect/repair door lock mechanism |
| F6 | Door Switch Error | Fault with door switch or lock | Inspect switch; ensure door is closing properly |
| F7 | Keypad Error | Stuck or shorted keypad/touchpad | Clean, recalibrate, or replace keypad |
| F8 | Control Fault | Same as F0/F1—control board issue | Diagnose and replace control board |
Show all 32 GE error codes
| Error Code | Error Type | Description | Recommended Action |
|---|---|---|---|
| F9 | Door Lock Error | Same as F5—door lock mechanism fault | Inspect or replace lock mechanism |
| F10 | Runaway Temperature | Temperature rising uncontrollably | Check stuck relay or control board |
| F11 | Latch Error | Latch mechanism fault in self-cleaning ovens | Inspect/repair latch |
| F12 | Keytail Error | Fault in keytail (keypad-to-board ribbon) | Inspect and repair/replace keytail |
| F13 | Control Board Error | Control board malfunction | Replace board |
| F14 | Relay Error | Faulty relay affecting heating | Diagnose and replace relay |
| F15 | Lock Error | Another variation of door lock error | Inspect or replace lock |
| F16 | Temp Sensor Error | Temperature sensor issue | Calibrate or replace sensor |
| F17 | Control Error | Control system malfunction | Replace control board |
| F18 | Door Lock Error | Same as above – lock issue | Inspect or replace door lock |
| F19 | Control Error | General control board fault | Diagnose and replace board |
| F20 | Temp Sensor Error | Sensor issue | Recalibrate or replace sensor |
| F21 | Control Error | General board malfunction | Replace control board |
| F22 | Temp Sensor Error | Another variation of sensor failure | Replace or recalibrate sensor |
| F23 | Keytail Error | Issue with keytail (keypad connection) | Inspect/repair ribbon cable |
| F24 | Relay Error | Relay fault affecting oven functions | Diagnose and replace relay |
| F25 | Temp Sensor Error | Fault in temperature sensor | Replace sensor |
| F26 | Control Error | General control board problem | Replace control board |
| F27 | Temp Sensor Error | Sensor not working correctly | Check and replace sensor |
| F28 | Control Error | Another control board malfunction | Replace control board |
| F29 | Temp Sensor Error | Sensor problem affecting temperature accuracy | Replace sensor |
| F30 | Control Error | Board-level fault | Diagnose and replace control board |
| F31 | Temp Sensor Error | Sensor not functioning properly | Inspect and replace sensor |
| F32 | Keytail Error | Fault in keypad-to-board connection | Check keytail and replace if needed |
Seeing one of these codes? Book a technician →
Why Choose Us for GE Repair
What you get when we fix your GE oven.
Classic to Profile
Experienced with every GE generation.
F-Code Diagnostics
F0–F9 codes read and fixed at the source.
Upfront Pricing
Price agreed before work begins.
Same-Day Service
Most GE calls handled the day you book.
Other Brands We Repair
Electric ovens from 60+ manufacturers.
GE Oven Repair Across Toronto
Local GE service in every part of the city.
Frequently Asked Questions
Short answers to common questions.
Do you repair GE Profile ovens?
Yes — GE Profile, Café-style and classic GE electric ovens.
My GE oven shows F2. Is it dangerous?
F2 means overheating. Turn it off at the breaker and book a technician.
Why does my GE oven broil but not bake?
The bake element or its relay has usually failed — a common one-visit fix.
Do you offer a warranty on GE repairs?
Yes — parts and labor are covered.
GE Oven Giving You Trouble? Fixed Today.
Book online and save $25. Free service call with any repair.